Go to content

VEGA-N

Product > LABELING MACHINES > GLUE
DESCRIPTION
SEMIAUTOMATIC WET GLUE LABELLER   
  VEGA-N

The semi automatic wet glue labeling machine Vega-N applies square or rectangular labels (also wrapping around), to any sort of cylindrical container from 60 to 110 mm in diameter.
The rollers are bounded by bushings at both ends, to give the machine greater strength.
Every time that a container is placed on the rollers, the machine takes a label from the label store; the label passes on the glueing roller and then it gets wrapped around the bottle.
In case of bottles already labelled, the machine is able to place the back-label centered on the body label.
This machine is characterized by the use of a stepper motor to pick up the label, which gives the machine greater accuracy and stability in the centering of the counter-label.
It is also equipped with an electronic card with microprocessor and multifunction display, with indication of the labeled pieces. The centering system  is automatic: the operator enters the container diameter and the label's width in millimeters (or inches) and the machine realizes the centering. Entered settings are stored when the machine is turned off.
The machine is provided with two engines. One engine starts the labelling rollers; the other engine stepper acts on the rubber roller that takes the label away.
Both the glue store and gluing roller can be removed easily, allowing for a quick and easy cleaning.
The machine can be modified as needed by the customer. Especially the maximum diameter container can be increased according to the customer's needs.

IN WHICH  CONDITIONS WE RECOMMEND THE WET GLUE LABELLER MODEL VEGA-N
WHENEVER THE LABEL TO BE APPLIED IS ESPECIALLY THICK AND RIGID        
Indeed, the greater pressure applied on the container by the rollers, thanks to the torsion spring with which it is equipped, allows better application of the label.
WHENEVER THE CONTAINER IS SLIGHTLY CONICAL
Indeed, thanks to the guillotine orientable system, it is possible to obtain a perfect container surface adherence to the rollers, no need for any additional kit.

IN WHICH CONDITIONS IS NOT POSSIBLE TO HANDLE LABELS USING WET GLUE LABELLER VEGA-N
WHENEVER THE LABEL WIDTH IS LESS THAN 70 mm.
WHENEVER THE CONTAINER DIAMETER IS LESS THEN 60 mm.
WHENEVER THE CONTAINER DIAMETER IS GREATER THAN 110 mm.
WHENEVER THE CONTAINER IS NOT RIGID (SOFT CONTAINER).
IN OPTION
Cart assembled on wheels
STANDARD MACHINE TECHNICAL SPECIFICATIONS

Machine sizes
44x41x41 cm
Weight
23 Kg
Motors
n.1 gearmotor 230 V single-phase 25 W (motor rotation container); n.1 stepper motor 48V – 2A (motor take labels)
Centering back-label system
Automatically.
The operator enters the container diameter, the first label width and the second label width.
Counterpieces
Yes
Take label system
End label sensor; roller picks up labels controlled by stepper motor
Frame machine material
Aluminum. Machine components made in stainless steel and brass
Label surface application
Cylindrical – Guillotine system to apply to the container 5kg pressure  and also allow the slightly conical containers labelling.
Minimum label width
70 mm
Diameter range container (standard)
60-110 mm
Maximum production
600-800 pc/h
Recommended glule
prod. Henkel - AQUENCE PET 1770
CONTAINERS AND LABELS TECHNICAL SPECIFICATIONS
Via Fossata, 64
10155 - TORINO (ITALY)
Tel.:     +39 011 24.82.827
Vat Number: IT 06305880012
Skype:  enolmac.labellingmachines
Back to content