Go to content

SATURNO-N

Product > LABELING MACHINES > SELF-ADHESIVE
DESCRIPTION
SELF-ADHESIVE MACHINE SEMI AUTOMATIC SATURNO-N

The labeller Saturno-N, made in stainless steel AISI 304, apply self-adhesive labels front and back-labels on any type of cylindrical container having a diameter from 20 up to 180 mm.
The machine can also be used to label containers having a low resistance to pressure, for example PET or PE.

The labels and back-labels have to be placed in two labels reels, at a distance of about 2-3 mm. The label is applied automatically when the operator inserts the bottle between the rollers.

  • The machine frame.
The rollers and also the label detachment plate are bound at both ends, so as to get to the machine a great mechanical strength.

  • Automatic centering system.
The machine is equipped with a microcontroller and a multi-function display; the operator easily put in the container diameter, the labels width the machine automatically applies the labels centered. A fine adjustment away from a potentiometer allows optimization of the centering, compensating for errors due to changes in mechanical load.
This system also displays the pieces already labeled (pieces-counting).

  • Sensor stop labeling cycle.
The machine is equipped with an optical sensor self-learning fork (photodiode / phototransistor Vishay) controlled by the microcontroller: it is not necessary to adjust it; it is sufficient that, when the machine is turned on, a label is positioned below the optical sensor.

The machine is equipped on a cart with wheels for easy handling.
The machine can be equipped with a marker thermal transfer, for printing the lot number / expiry date, on any type of label material.
The machine can be equipped with a photocell system to center the label with respect to another label already applied, or with respect to a reference (notch).
IN OPTION
Marker thermal transfer, for printing the lot number / expiry date, on any type of label material.
Photocell system to center the label with respect to another label already applied, or with respect to a reference (notch).
STANDARD MACHINE TECHNICAL SPECIFICATIONS
Machine sizes
86x126x33 cm
Machine weight
60 kg
Motors
n.3 gearmotors 230V-single-phase; P = 150 W
Label surface application
Cylindrical
Diameter range container
20 - 180 mm
Maximum label tape height
175 mm
Maximum production
800-900 pc/h
Via Fossata, 64
10155 - TORINO (ITALY)
Tel.:     +39 011 24.82.827
Vat Number: IT 06305880012
Skype:  enolmac.labellingmachines
Back to content