Go to content

SATURNO-N equipped with thermal marker

Product > LABELING MACHINES > SELF-ADHESIVE
DESCRIPTION
SELF-ADHESIVE MACHINE SEMI AUTOMATIC SATURNO-N equipped with thermal marker

The labeller Saturno-N, made in stainless steel AISI 304, apply self-adhesive labels front and back-labels on any type of cylindrical container having a diameter from 20 up to 180 mm.
The machine can also be used to label containers having a low resistance to pressure, for example PET or PE.

The labels and back-labels have to be placed in two labels reels, at a distance of about 2-3 mm. The label is applied automatically when the operator inserts the bottle between the rollers.

The machine frame.
The rollers and also the label detachment plate are bound at both ends, so as to get to the machine a great mechanical strength.

Automatic centering system.
The machine is equipped with a microcontroller and a multi-function display; the operator easily put in the container diameter, the labels width the machine automatically applies the labels centered. A fine adjustment away from a potentiometer allows optimization of the centering, compensating for errors due to changes in mechanical load.
This system also displays the pieces already labeled (pieces-counting).

Sensor stop labeling cycle.
The machine is equipped with an optical sensor self-learning fork (photodiode / phototransistor Vishay) controlled by the microcontroller: it is not necessary to adjust it; it is sufficient that, when the machine is turned on, a label is positioned below the optical sensor.

The machine is equipped on a cart with wheels for easy handling.
The machine is equipped with a marker thermal transfer, for printing the lot number / expiry date, on any type of label material.
The machine can be equipped with a photocell system to center the label with respect to another label already applied, or with respect to a reference (notch).
IN OPTION
Photocell system to center the label with respect to another label already applied, or with respect to a reference (notch).
STANDARD MACHINE TECHNICAL SPECIFICATIONS
Machine sizes
86x126x33 cm
Machine weight
60 kg
Motors
n.3 gearmotors 230V-single-phase; P = 150 W
Thermal marker
Printing width of 30mm, 3 lines, character height of 3mm;
200 W; air compressed 4 Bar
Label surface application
Cylindrical
Diameter range container
20-180 mm
Maximum label tape height
175 mm
Maximum production
800-900 pc/h
Via Fossata, 64
10155 - TORINO (ITALY)
Tel.:     +39 011 24.82.827
Vat Number: IT 06305880012
Skype:  enolmac.labellingmachines
Back to content