Go to content

NETTUNO mod.3 equipped with thermal marker

Product > LABELING MACHINES > SELF-ADHESIVE
DESCRIPTION
SELF-ADHESIVE MACHINE SEMI AUTOMATIC NETTUNO mod.3 EQUIPPED WITH THERMAL MARKER

The labeller Nettuno mod.3, made in stainless steel AISI 304, applies self-adhesive labels front and back-labels on any type of cylindrical container having a diameter from 20 up to 180 mm.
The machine can also be used to label containers having a low resistance to pressure, for example PET or PE.
The machine is equipped with a thermal marker transfer, for printing the lot number / expiry date, on any type of label material.
To apply label and back label, they must be positioned on the same tape, alternated, at a distance of about 2-3 mm. The label is applied automatically when the operator inserts the bottle between the rollers.

  • The machine frame.
The rollers and also the label detachment plate are bound at both ends, so as to get to the machine a great mechanical strength.

  • Automatic centering system.
The machine is equipped with a microcontroller and a multi-function display; the operator easily puts in the container diameter, the labels width the machine automatically applies the labels centered. A fine adjustment by a potentiometer allows to optimize the centering, compensating for errors due to changes in mechanical load.
This system also displays the pieces already labeled (pieces-counting).

  • Sensor stop the labeling cycle.
The machine is equipped with an optical sensor self-learning fork (photodiode / phototransistor Vishay) controlled by the microcontroller: it is not necessary to adjust it; it is sufficient that, when the machine is turned on, a label is positioned below the optical sensor.

The machine can be equipped with a photocell system to center the label with respect to another label already applied, or with respect to a reference (notch).
IN OPTION
Photocell system to center the label with respect to another label already applied, or with respect to a reference (notch).
Cart with wheels for easy handling.
STANDARD MACHINE TECHNICAL SPECIFICATIONS
Machine sizes (equipped with thermal marker)
53x34x52 cm
Machine weight (equipped with thermal marker)
26 kg
Motors
n.2 gearmotors 230V-single-phase; P = 100 W
Thermal marker
Printing width of 30 mm, 3 lines, character height of 3 mm; 200W; air compressed 4 Bar
Label surface application
Cylindrical
Maximum label tape height
175 mm
Diameter range container
20-180 mm
Maximum production
800-900 pc/h
Via Fossata, 64
10155 - TORINO (ITALY)
Tel.:     +39 011 24.82.827
Vat Number: IT 06305880012
Skype:  enolmac.labellingmachines
Back to content