MARTE QUADRO-N
Product > LABELING MACHINES > SELF-ADHESIVE
DESCRIPTION | |
SELF-ADHESIVE MACHINE SEMI AUTOMATIC MARTE QUADRO-N The labeller MARTE QUADRO-N, made in stainless steel AISI 304, applies self-adhesive labels front and back-labels on flat and rounded surfaces.. To apply labels on a flat and rounded surface, a system of plates commanded by a pneumatic cylinder, takes away the label and takes it on the container. This system allows a perfect labelling, without creases, also on container surfaces not perfectly flat. The machine can also be used to label containers having a low resistance to pressure, for example PET or PE. Tha machine can be equipped (option) with a kit for cylindricals containers. To apply label and back-label on a cylindrical surface, they must be positioned on the same tape, alternated, at a distance of about 2-3 mm. The label is applied automatically when the operator inserts the bottle between the rollers.
The rollers and also the label detachment plate are bound at both ends, so as to get to the machine a great mechanical strength.
The machine is equipped with a microcontroller and a multi-function display; to apply label and back-label on cylindrical containers, the operator easily puts in the container diameter, the labels width the machine automatically applies the labels centered. A fine adjustment by a potentiometer allows to optimize the centering, compensating for errors due to changes in mechanical load. This system also displays the pieces already labeled (pieces-counting).
The machine is equipped with an optical sensor self-learning fork (photodiode / phototransistor Vishay) controlled by the microcontroller: it is not necessary to adjust it; it is sufficient that, when the machine is turned on, a label is positioned below the optical sensor. | |
IN OPTION | |
- Cart with wheels. - Thermal marker - Kit to label cylindricals containers. - Photocell system to center the label with respect to another label already applied, or with respect to a reference (notch). | |
STANDARD MACHINE TECHNICAL SPECIFICATIONS | |
Power supply | 230V - single phase - 50Hz - 100W |
| Thermal marker (option) | Printing width of 30mm, 3 lines, character height of 3mm; 200 W; air compressed 4 Bar |
Label surface application | Flat / rounded surface |
Maximum label tape height | 175 mm |
Maximum production | 900 pc/h |
Sizes | 90x62x38 cm |
Weight | 30kg |