Go to content

MARTE-N SPECIAL

Product > LABELING MACHINES > SELF-ADHESIVE
DESCRIPTION
SELF-ADHESIVE MACHINE SEMI AUTOMATIC MARTE QUADRO-N SPECIAL

The labeller MARTE QUADRO-N SPECIAL, made in stainless steel AISI 304, applies self-adhesive labels front and back-labels on flat or rounded surfaces and also on any type of cylindrical container having a diameter from 20 up to 180 mm.
To apply labels on a flat surface, a system of plates commanded by a pneumatic cylinder, takes away the label and places it on the container.
This system allows a perfect labelling, without creases, also on container surfaces not perfectly flat.

The machine can also be used to label containers having a low resistance to pressure, for example PET or PE.

Tha machine is equipped with a kit for cylindricals containers. To apply label and back-label on a cylindrical surface, they must be positioned on the same tape, alternated, at a distance of about 2-3 mm. The label is applied automatically when the operator inserts the bottle between the rollers.

  • The machine frame.
The rollers and also the label detachment plate are bound at both ends, so as to get to the machine a great mechanical strength.

  • Automatic centering system.
The machine is equipped with a microcontroller and a multi-function display; to apply label and back-label on cylindrical containers, the operator easily puts in the container diameter, the labels width the machine automatically applies the labels centered. A fine adjustment by a potentiometer allows to optimize the centering, compensating for the errors due to changes in mechanical load.
This system also displays the pieces already labeled (pieces-counting).

  • Sensor stop labeling cycles.
The machine is equipped with an optical sensor self-learning fork (photodiode / phototransistor Vishay) controlled by the microcontroller: it is not necessary to adjust it; it is sufficient that, when the machine is turned on, a label is positioned below the optical sensor.
IN OPTION
- Cart with wheels.
- Thermal marker
- Photocell system to center the label with respect to another label already applied, or with respect to a reference (notch).
STANDARD MACHINE TECHNICAL SPECIFICATIONS
Power supply
230V single phase - 50Hz - 100W
Thermal marker (option)
Printing width of 30mm, 3 lines, character height of 3mm;
200 W; air compressed 4 Bar
Label surface application
Flat / rounded.
Cylindrical  (container diameter 20mm-180 mm)
Maximum label tape height
175 mm
Maximum production
900 pc/h
Sizes
90x62x38 cm
Weight (flat / rounded machine setting)
30kg
Weight - cylindrical container kit
13,5kg
Via Fossata, 64
10155 - TORINO (ITALY)
Tel.:     +39 011 24.82.827
Vat Number: IT 06305880012
Skype:  enolmac.labellingmachines
Back to content