Go to content

SIRIO Mod.3 PLUS

Product > LABELING MACHINE > GLUE
DESCRIPTION
WET GLUE LABELING MACHINE SEMIAUTOMATIC    
   SIRIO mod.3 PLUS

Wet glue labeling machine semiautomatic Sirio mod.3 PLUS, built in stainless steel AISI 304, applies square or rectangular labels (also wrapping around), to any sort of cylindrical container from 40 to 180 mm in diameter.
The rollers are bounded by bushings at both ends, to give to the machine a greater strength.
Every time that a container is placed on the rollers, the machine take a label from the label store; the label, after having gummed it, it wraps up around the same bottle.
In case of bottles already labelled, the machine is able to place the back-label centered on the body label.
This machine is characterized by the use of a stepper motor to pick up the label, which gives to the machine greater accuracy and stability in the centering of the counter-label.
It is also equipped with an electronic card with microprocessor and multifunction display, with indication of the labeled pieces. The centering system  is automatic: the operator enter the diameter container and the labels width  in millimeters (or inch) and the machine realizes the centering. Entered settings are stored when the machine is turned off.
The machine is provided with two engines. One engine starts the labelling rollers; the other engine stepper acts on the rubber roller that takes the label away.
Glue store and glueing roller are easily foldaway for a quick and easy cleaning.
The machine can be modified as needed of the customer. Especially the maximum diameter container can be increased according to the customer's needs.
IN OPTION
Cart assembled on wheels.
STANDARD MACHINE TECHNICAL SPECIFICATIONS
SIZES
44x41x41 cm
WEIGHT
23 Kg
ENGINES
1 engine 230 V - single phase; P=60 W -
1 engine stepper 2,2 A - P = 50 W
PIECE COUNTER
Yes
LABEL CENTERING SYSTEM
Automatically (container diameter - labels width entering)
TAKE LABEL SYSTEM
Automatically (microcontroller with label sensor)
Can apply a second label centered by a photocell
FRAME MACHINE MATERIAL
Stainless steel AISI 304
LABEL SURFACE APPLICATION
Cylindrical
MINIMUM LABEL WIDTH
55 mm
DIAMETER RANGE CONTAINER (STANDARD)
40 - 180 mm
MAXIMUM PRODUCTION
600-800 pieces/h
Via Fossata, 64
10155 - TORINO (ITALY)
Tel.:     +39 011 24.82.827
Fax:     +39 011 24.82.009
Skype:  enolmac.labellingmachines
Back to content